Raspberry Pi Camera Module
Crowtail- Base Shield for Raspberry Pi
This is a Crowtail base shield for Raspberry Pi with UART/I2C/Analog/Digital interface. All the Crowtail modules can be plugged onto Raspberry Pi through this base shield. Moreover, this shield has an on-board ADC chip so that analog output modules can be used on Raspberry Pi. The ADC chip used is MCP3008. It talks to Raspberry Pi using SPI interface.
SeeedStudio BeagleBone Green Wireless
FEATURES
- • The first Wi-Fi + Bluetooth Low Energy (BLE) board from BeagleBone community
- • Built-in 2.4 GHz TI WLinkTM8 Module with two antenna solution
- • Onboard chip antenna
- • IEEE 802.11b/g/n compliant
- • FCC, IC, ETSI/CE, and TELEC certified
- • Supports AP+STA mode of communication
- • Comply with Bluetooth Advanced Audio Distribution Profile (A2DP)
- • Supports MRAA library
Grove Base Cape for Beaglebone v2.0
One of the best things about Beaglebone Board is the massive accessible GPIOs coming out from its 2x 46 pin headers. However, as we know, all things has two sides - the good side and the bad side. 2x46 pins means 2x46 jumper wires, and 2x46 jumper wires putting on the board means – A REAL MESS. How can a rapid prototyping be called ‘rapid’ if you spend most of your time dealing with entangled wires? Now this Grove Base Cape for Beaglebone v2.0 is designed for real rapid prototyping with your Beaglebone board
